Check that you have purchased the correct wheel size pack. Your wheel size will be printed on the side of your tyres.

Make sure that wheels and tyres are dry and clean.

Take one Tyremask section from the pack. There are four sections per wheel.

Remove the peel off backing paper as shown in Fig. 1 to expose the adhesive surface.

With adhesive surface to the tyre, place the inner edge between wheel rim edge and the tyre (Fig. 2).

When the Tyremask section is in place press firmly onto the tyre.

Repeat with the other three sections overlapping each other about 1" (25mm).

Spray paint as instructions. Build up paint using several thin coats to avoid runs.